Sunday January 30th, 2005|
Right Flap Brace; More Deburring/Dimpling Bottom Wing Skins
Today I went out to do some more dimpling on the bottom skins, but I realized that I could go head and rivet the flap brace on the right wing (I'm still waiting on the AN470AD5 rivets I ordered to put into a couple of holes on the outboard bracket that I drilled out too large for a 4 rivet). As with the other wing, I drove all of these rivets since there was no way that I could get the squeezer yoke over the brace.
After riveting the brace, I went ahead and started deburring and dimpling the bottom skins. I got the two bottom skins completely ready to prime (except for scuffing). Here's the right wing with the inboard skin clecoed on.
...and the left wing (yipee!).