The following is my TODO list, which I print out and use in the shop.  As I finish
each item I will check it off and eventually remove it from this list.  People always
ask me when the airplane will be done.  The answer to that question is whenever this
list is empty. :-)

_ Tie off / tidy stick wires out of sticks
_ Paint and install the following:
  _ Center channel
  _ Flap Housing Side Covers
_ Finish baffling
  _ Alternator blast tube
_ Secure cowl hinge pins
_ Install AN5 bolts w/ cotter pins in the canopy hinges
_ Final install seat pans and safety seat back hinges
_ Finish Up Canopy Work
  _ Install secondary latch
  _ Install canopy seal (on fuselage AND on canopy side rails)
_ Fuel tank sender wiring
_ Install velcro for interior components
  _ Pilot's Seat
  _ Pax seat
  _ Baggage Floor Carpet
  _ Cabin Floor Carpet
_ Pitot Wiring
_ Make/Install Spinner Gap Fillers
_ Secure Dynon EMS & EFIS Serial Cables
_ Install Seatbelts
_ Calibrate Fuel Tanks
_ Fix Steps
_ Secure baffle cylinder wraps
_ Lower Emp Fairing
_ Fix tank leak in left tank
_ put rib in wing tip 
_ finish wiring lights in left wing tip