Thursday March 1st, 2007|
Forward Right Baffles Riveted
More work on the baffles today. I prepped and riveted the front right stuff together.
Here's the front ramp. I ended up using the c-frame to rivet this stuff. Note the prop line sticking out in the upper right photo. Also I'll probably end up trimming back some more of the front bulkhead.
I drilled a pilot hole for the oil hose.
Here you can see where it comes out. Yep...I'll have to trim through part of the attach angle. I'll also need to trim off some of the angle that's jutting below the screw location. The bracket is interfering with the alternator when it's rotated into place.
Tomorrow I hope to finish up the front left side. Then I need to reinforce the oil cooler mount somehow (I have a few ideas).